uPRODUCT DESCRIPTION
EnzyMagic 91™ is a concentrated enzymatic product specifically formulated for the cleaning of stains and odors that typically occur on surfaces exposed to high humidity and insufficient airflow. It works by penetrating and lifting the contaminants from the surface.
uBENEFITS
- Effectively cleans stains off any surface that is washable with water.
Note: Some severe stains may be permanent and irremovable, especially on certain porous surfaces.
- Penetrates and lifts hard to remove soils from all types of surfaces.
- Does not foster microbial strain resistance.
- USDA accepted as G.R.A.S. (Generally Regarded As Safe) according to CFR21 Sections 174-184.
- Ecologically safe, 100% biodegradable and harmless to humans, animals, marine and plant life.
- Nonflammable – can be used safely near open flames and in limited ventilation areas.
uCOMPATABILITY
Concrete, Cinder Blocks, Bricks, Stone, Aluminum, Vinyl, Ceramic Tiles, Wood, Wallboard, Stucco, Plastic, Leather, Fabrics, Carpet and any surface that is washable with water.
uUSES
Bathrooms, Showers, Bath Houses, Boats, Basements, Crawl Spaces, Kitchens, Ducts, Vents, Walls, Floors, Ceilings, Roofs, Patios, Patio Furniture, Decks, Sidewalks, Driveways, Horse Saddles, Rail Cars, Tanker Trucks, Silos, Manufacturing Facilities, Processing Equipment, and any surface that is washable with water.
uAPPLICATION
EnzyMagic 91™ can be used on any surface that is washable with water. It is compatible with most commercial cleaning systems (pressurized, mechanical, manual) and with fresh or saline water. Optimal water temperature is 900 F (320 C), however, a range from 65-1200 F or 18‑490 C can be used effectively.
Apply EnzyMagic 91™ to affected area and wash away stains with sponge, cloth, or brush. Repeat application periodically as needed. For severe stains, apply solution and let stand before scrubbing. Scrub discolored grout with a brush.
EnzyMagic 91™ concentrate dilutes 9:1 with water, or 12 ounces (1½ cups) of concentrate will make 1 gallon of ready-to-use product.
Washing Machines: Fill empty washing machine tank with water. Add ½ cup of concentrate to 7-10 gallons of washing machine tank water. Mix well. Add clothes. Run washing machine cycle. Note: Check in hidden area for colorfastness prior to laundry. Fabric must be laundered in cold or warm water only. Optimal water temperature is 900 F (320 C), however, a range from 65-1200 F or 18-490 C can be used effectively.
uSTORAGE AND HANDLING
Read the label and Material Safety Data Sheet for complete handling information before using this product.
uPRODUCT DESCRIPTION
All-Clean™ is a one-step, non-streaking, deodorizing cleaner. Not for use on food contact surfaces.
uBENEFITS
- Deodorizes and cleans most porous and nonporous surfaces
- This product is a one-step ready to use deodorizing cleaner
- Will not leave grit, streaks or soap scum.
- This product is recommended for use as a deodorizer and cleaner on porous and hard, non-porous surfaces.
- This product neutralizes musty odors and tough odors from smoke, pet accidents, and spills on contact.
- This product cleans, shines and deodorizes all hard non-porous surfaces. It eliminates the odors caused by moisture, leaving bathrooms and kitchens clean and fresh smelling.
- Non-flammable
- Contains no phosphates, acids or alkalis
- Fast and easy to use, dries quickly after application
uDIRECTIONS FOR GENERAL USE
Kitchen/Bathroom/Household Cleaning & Deodorizing: To clean and deodorize hard, nonporous surfaces such as floors, walls, counters, sinks, tubs, toilets, glazed tile, exterior surfaces of appliances, refrigerators or freezers, microwave exteriors, stovetops and hoods, tables, garbage pails, faucets, etc. Apply as is with cloth, sponge, mop or mechanical spray. If a mechanical spray is used, spray must be coarse. Hold container 6 inches to 8 inches from surface and spray until thoroughly wet. Best results occur when product is permitted to sit for up to 10 minutes. For heavily soiled areas, a pre-cleaning step is required.
uGeneral Application:
This is a proven one-step cleaner and deodorizer.
Apply this product undiluted to porous surfaces like: walls, floors, concrete and wood or nonporous surfaces such as tables, chairs, countertops, sinks, glazed tile, glazed porcelain and bed frames with a cloth, mop or mechanical spray device so as to thoroughly wet surfaces. For porous surfaces like wood and concrete, wet surface thoroughly and scrub with a brush. Let set for 10 minutes, rinse and repeat if necessary. If mechanical spray device is used, spray should be coarse. Spray 6-8 inches from surface. Rub with brush, sponge or cloth. Do not breathe spray (mist).
NOTE: If spraying in a room where human or pet foods may be contaminated by spray, remove the food or cover to protect from over-spray. Wipe excess and allow to air dry.
uGeneral Deodorization: To deodorize, apply this product undiluted. Excess material should be wiped up & allowed to air dry.
For Deodorizing Garbage Cans, Garbage Trucks, Industrial Waste Receptacles and Garbage Handling Equipment: It is especially important to preclean for the product to perform properly. Apply a wetting solution of this product and permit it to penetrate for 10 minutes before rinsing.
For Odors Caused by Dogs, Cats and Other Domestic Animals: Use on rugs, floors, walls, tile, cages, crates, mats, litter boxes, floor coverings, or any surface soiled by a pet. Test a small inconspicuous area first. Blot problem area. Then follow directions for “General Deodorization”.
Odor Control Directions: This product will effectively inhibit odors caused by high humidity and insufficient airflow. Thoroughly wet all treated surfaces completely and wipe. Let air dry. Repeat application weekly or when odors and staining reappear.
*For a general description of the typical chemical and physical properties refer to the Material Safety and Data Sheet.
uCOMPATIBILITY
All-Clean™’s water-based formulation offers uniform dispensability and is compatible with a wide variety of materials.
WARNING: DO NOT INHALE SPRAY!
uSTORAGE AND HANDLING
Read the label and Material Safety and Data Sheet for complete handling information before using this product. Store in a cool, dry place.
uPACKAGING
All-Clean™ is packaged in gallons, pails, drums, and disposable totes.
uPRODUCT DESCRIPTION
Surface Guard™ is ready-to-use formula for treating nonporous surfaces. It is a water‑stabilized, siloxane ammonium chloride that forms a clear barrier on a broad range of surfaces. This barrier is resistant to the growth of microorganisms on the coating’s surface and adheres to all substrates. This water-based product eliminates the hazards of conventional additives and heavy metal treatments.
uBENEFITS
- Safe water based product
- Leaves behind an invisible barrier that is resistant to odors and stains typically associated with bacteria and fungi.
- Can be safely used touch points (commonly touched areas)
- Allows for good vapor transfer
- Applies easily, dries and bonds invisibly
- Effective over a broad pH range (3-10)
uAPPLICATION – DO NOT DILUTE THIS PRODUCT
Commercial Use
Surface Guard™ can be applied to substrates by pump and commercial spray applications, dipping or soaking. All substances can be air-dried.
uCOMPATIBILITY
Surface Guard™’s water-based formulation offers uniform dispensability and is compatible with most substrates. Before applying to an exposed area, treat a small area in an inconspicuous location.
*Contains an antimicrobial registered with the EPA for this use and meets the guidelines under the “treated article exemption” 40 CFR 152.25.
uSTORAGE AND HANDLING
Read the label and Material Safety and Data Sheet for complete handling information before using this product. Product should be stored in a cool, dry place. Shelf life does not exceed 12 months.
uPACKAGING
Surface Guard™ is packaged in 4x1 gallon cases, 5-gallon pails, 55-gallon drums, and 275‑gallon totes. Rinse container thoroughly before disposal.
uPRODUCT DESCRIPTION
Construction Shield™ is a ready-to-use, water-resistant coating used to protect interior surfaces with a thin semi-transparent, semi-permeable protective layer. This coating contains product which are registered with EPA as mildewcides, algaecides, and antimicrobials*. A pigment can be added to give a visual marker for even application.
uBENEFITS
- Provides a water-resistant, stain-resistant coating.
- Latex primer / sealer for most porous and nonporous substrates.
- Coatings protect materials from moisture-related damage.
- Dries quickly on most surfaces.
- Effective over a broad pH range (3-11).
- Inhibits microbial growth on the coating surface.*
- Easy clean up with water.
*Contains an antimicrobial registered with the EPA for this use and meets the guidelines under the “treated article exemption” 40 CFR 152.25.
uAPPLICATION
Apply to clean dry surfaces only! Remove all dirt and debris prior to application. If stains are present, clean thoroughly with EnzyMagic 91™ or All-Clean™ and allow surface to dry prior to applying the coating. Applying product to wet or dirty surfaces will dilute the product, inhibit adhesion and reduce its effectiveness.
Spray – Airless
Pressure: 2000 PSI, Tip: .015” - .021”, Reduction: None
Roller
No reduction necessary. Use a ¼” – ¾” nap synthetic roller cover
Brush
No reduction necessary. Use nylon/polyester brush
Coverage
200-400 sq. ft./gallon
Drying Time @ 770 F, 50% RH: Temperature and humidity dependant
Touch: 1 hour Recoat: 4 hours
uCOMPOSITION
Construction Shield™ is a clear latex coating with quaternary ammonium compounds and preservatives. It is a concentrated product design to be cut with water for economic application.
uCOMPATIBILITY
Construction Shield™’s water-based formulation offers uniform dispensability and is compatible with a wide variety of materials.
uSTORAGE AND HANDLING
Read the label and Material Safety Data Sheet for complete handling information before using this product.
uPACKAGING
Construction Shield™ is packaged in 5-gallon pails, 55-gallon drums, and 275-gallon totes. Thoroughly rinse containers before disposal.
uPRODUCT DESCRIPTION
Moisture Shield™ is a durable encapsulate that hides staining & discoloration. Once the coating cures it resists additional staining, discoloration and odors that typically occur on surfaces exposed to high humidity and insufficient airflow. One coat makes an excellent primer on concrete and concrete block. Pigment can be added to a second coat to finish a basement living space.
uBENEFITS
- High solids product. Contains over 43% solids.
- Provides a durable, water-resistant coating.
- Latex primer / sealer for concrete, concrete block, and all masonry products.
- Coatings protect materials from moisture-related damage.
- Dries quickly on most surfaces.
- Effective over a broad pH range (3-11).
- Interior / Exterior stain blocking by inhibiting microbial growth on the coating surface*.
- Provides UV protection on exterior surfaces.
- Covers dried water stains.
- Assures uniform appearance.Prepares most surfaces with one coat.
- Easy clean up with water.
*Contains an antimicrobial registered with the EPA for this use and meets the guidelines under the “treated article exemption” 40 CFR 152.25.
uAPPLICATION
Apply to clean dry surfaces only! Remove all dirt and debris prior to application. If stains are present, clean thoroughly with EnzyMagic 91™ or All-Clean™ and allow surface to dry prior to applying the coating. Applying product to wet or dirty surfaces will dilute the product, inhibit adhesion and reduce its effectiveness.
Roller
No reduction necessary. Use a ¼” – ¾” nap synthetic roller cover
Brush
No reduction necessary. Use nylon/polyester brush
Coverage
200-400 sq. ft./gallon
Drying Time @ 770 F, 50% RH: Temperature and humidity dependant
Touch: 1 hour Recoat: 4 hours
uCOMPOSITION
Moisture Shield™ is a high solids paint primer that contains stain blocker, UV light protectants and preservatives.
uCOMPATIBILITY
Moisture Shield™’s water-based formulation offers uniform dispensability and is compatible with a wide variety of materials.
uSTORAGE AND HANDLING
Read the label and Material Safety Data Sheet for complete handling information before using this product.
uPACKAGING
Moisture Shield™ is packaged in 5-gallon pails, 55-gallon drums, and 275-gallon totes. Thoroughly rinse containers before disposal.
