PRODUCT DESCRIPTION
Microbloc® DC is a one-step, non-streaking, deodorizing cleaner that kills odor-causing bacteria.
BENEFITS
- Reduces labor by effectively killing odor causing bacteria
- This product is a one-step ready to use deodorizing cleaner
- Will not leave grit, streaks or soap scum.
- This product is recommended for use as a deodorizer and cleaner on porous and hard, non-porous surfaces. A potable water rinse is required after application on food contact surfaces.
- This product neutralizes musty odors and tough odors from smoke, pet accidents, and spills on contact.
- This product cleans, shines and deodorizes all hard non-porous surfaces listed on the label. It inhibits the growth of mold and mildew, leaving bathrooms and kitchens clean and fresh smelling.
- Non-flammable
- Contains no phosphates, acids or alkalis
- Fast and easy to use
- Dries quickly after application
DIRECTIONS FOR GENERAL USE
Kitchen/Bathroom/Household Cleaning: Apply this product undiluted with a cloth, sponge, mop or directly on surface with a mechanical spray. If a mechanical spray is used spray must be coarse. Hold container 6 inches to 8 inches from surface and spray until thoroughly wet. Do not use on paint or acrylic plastics. Wipe the soiled area clean. This product is not to be used on dishware, glasses or eating utensils.
Deodorize: To deodorize hard, non-porous surfaces such as floors, walls, counters, sinks, tubs, toilets, glazed tile, exterior surfaces of appliances, refrigerators or freezers, microwave exteriors, stovetops and hoods, tables, garbage pails, faucets apply as is with cloth, sponge, mop or mechanical spray. If a mechanical spray is used, spray must be coarse. Hold container 6 inches to 8 inches from surface and spray until thoroughly wet. Treated surface must remain wet for 10 minutes before wiping. For heavily soiled areas, a pre-cleaning step is required. The pre-clean step should be done according to the instructions under Kitchen/Bathroom/Household Cleaning. Rinse with potable water after use on surfaces that come in contact with food.
APPLICATION
Deodorizer and Cleaner to kill odor-causing bacteria
This is a proven one-step cleaner and deodorizer.
Apply this product undiluted to walls, floors and other hard, (inanimate) non-porous surfaces such as tables, chairs, countertops, sinks, glazed tile, glazed porcelain and bed frames with a cloth, mop or mechanical spray device so as to thoroughly wet surfaces. Treated surfaces must remain wet for 10 minutes. If mechanical spray device is used, spray should be coarse. Spray 6-8 inches from surface. Rub with brush, sponge or cloth. Do not breathe spray (mist). Rinse with potable water after use on surfaces that come in contact with food.
NOTE: With spray applications cover or remove all food products. Apply product undiluted and replace if product becomes soiled.
For heavily soiled areas, a preliminary cleaning is required. Then wipe excess with sponge, mop or cloth or allow to air dry.
General Deodorization: To deodorize, apply this product undiluted. Excess material should be wiped up or allowed to air dry.
For Deodorizing Garbage Cans, Garbage Trucks, Industrial Waste Receptacles and Garbage Handling Equipment: It is especially important to preclean for the product to perform properly. Apply a wetting solution of this product.
For Odors Caused by Dogs, Cats and Other Domestic Animals: Use on rugs, floors, walls, tile, cages, crates, mats, litter boxes, floor coverings, or any surface soiled by a pet. Test a small inconspicuous area first. Blot problem area. Then follow directions for “General Deodorization”.
Mold and Mildew Odor Control Directions: This product will effectively inhibit odors caused by mold and mildew (Aspergillus niger) on hard, non-porous surfaces. Thoroughly wet all treated surfaces completely. Let air dry. Repeat application weekly or when odors and staining reappear.
*See the “Master Label” for complete instructions on the proper application and use of Microbloc® DC. For a general description of the typical chemical and physical properties refer to the Material Safety and Data Sheet.
COMPATIBILITY
Microbloc® DC’s water-based formulation offers uniform dispensability and is compatible with a wide variety of materials.
STORAGE AND HANDLING
Read the label and Material Safety and Data Sheet for complete handling information before using this product.
PACKAGING
Microbloc® DC is packaged in pails, drums, and disposable totes.
REMARKS
If you need assistance or information, please call your nearest Paradigm
