 |
MSP
(Masonry Surface Protectant)
For the Remediation & Construction Industries
PRODUCT DESCRIPTION
Microbloc ® MSP is a durable self-priming paint for basement walls and crawl spaces. It dries to a white mold & mildew resistant film. Use where there is high humidity and insufficient airflow to create a bright long lasting stain and odor free environment.
BENEFITS
• High solids product. Contains over 43% solids.
• Provides a durable, water-resistant coating.
• Latex primer / sealer for most porous and nonporous substrates.
• Coatings protect materials from moisture-related damage.
• Dries quickly on most surfaces.
• Effective over a broad pH range (3-11).
• Interior / Exterior stain blocking by inhibiting microbial growth on the coating surface*.
• Provides UV protection on exterior surfaces.
• Covers dried water stains.
• Assures uniform appearance.
• Prepares most surfaces with one coat.
*Contains an antimicrobial registered with the EPA for this use and meets the guidelines under the “treated article exemption” 40 CFR 152.25.
APPLICATION
Apply to clean dry surfaces only! Remove all dirt and debris prior to application. If stains are present, clean thoroughly with Microbloc® DC, Microbloc® MMR, or Microbloc ® OSR and allow surface to dry prior to applying the coating. Applying product to wet or dirty surfaces will dilute the product, inhibit adhesion and reduce its effectiveness.
Spray – Airless
Pressure: 2000 PSI, Tip: .015” - .021”, Reduction: None
Roller
No reduction necessary. Use a ¼” – ¾” nap synthetic roller cover
Brush
No reduction necessary. Use nylon/polyester brush
Microbloc® MSP Created: 2/14/07 Page 1 of 2
Microbloc® is a registered trademark of Paradigm Labs, Inc.
Microbloc® MSP Created: 2/14/07 Page 2 of 2
PRODUCT INFORMATION SHEET
Coverage
200-400 sq. ft./gallon
Drying Time @ 77 0 F, 50% RH: Temperature and humidity dependant
Touch: 1 hour Recoat: 4 hours |
|
