SANITIZATION PROTOCOL
                                                            Chapter 13 "Mold-Free Construction"

1) Keep the premises clean and regularly dust, vacuum, and mop.
2) Install an efficient air purifier in the home to maintain good indoor air quality and reduce dust. This should also include IAQ solutions for the HVAC system.
3) Use hood vents when cooking, cleaning, and dishwashing.
4) Keep closet doors ajar, where possible, to increase air flow in the closets or install vented doors.
5) Avoid excessive amounts of indoor plants.
6) Use exhaust fans when bathing/showering.
7) Leave exhaust fans on long enough to remove moisture from the room.
8) Use ceiling fans.
9) Water all indoor plants outdoors, if possible.
10) Wipe down any moisture and/or spillage.
11) Wipe down bathroom walls and fixtures after bathing/showering. There are some good products out there for this very purpose.
12) Wipe down any vanities/sink tops.
13) Avoid drying clothes by hang-drying indoors.
14) Avoid air drying dishes.
15) Open blinds/curtains to allow light into premises.
16) Wipe down floors after any water spillage.
17) Hang shower curtains within the bath when showering.
18) Securely close shower doors, if present, when showering.
19) Leave bathroom and showers door open after use.
20) Use dryer if present for wet towels.
21) Use household cleaners (we prefer bio-degradable enzyme cleaners) on any hard surfaces.
22) Remove any moldy or rotting food
23) Remove garbage regularly.
24) Wipe down any and all visible signs of moisture.
25) Regularly scan the ceiling for evidence of roof leaks.
26) Periodically check the air conditioning vents to be sure they are clean.
27) Change the air conditioning filter regularly.
28) Perform scheduled maintenance on your air conditioning system, including, but not limited to, cleaning the evaporator coil.
29) Wipe down windows and sills if moisture is present.
30) Regularly, inspect for leaks under the sinks and around the base of the water closets, around the washing machine and water heater. 31) Check all washer hoses and outside garden hose connections.
32) Regularly empty dehumidifier.
33) Clean behind the refrigerator and around the air conditioning air handler if possible.
34) Empty the refrigerator condensation pan where possible.
35) If possible, pour a small amount of biocide in the drip pan of the air conditioning air handler to decrease the potential for mold growth.
36) Answer this question regularly and check for the signs of mold: “If I were mold and liked moisture, where would I feel most comfortable to set up a home and build a family?”

                                                         Points to remember about Sanitization Protocol…

                    • It’s NOT about one product!
                                                       • It IS about nutrient, moisture, and environment.
                                                                                                  • It IS about partnering to include EVERY item.